Product Description
The "8-Port 12Gb SAS RAID Card (with 2GB cache, PMC) (CTO&BTO)" is a high-performance storage controller designed for enterprise servers and storage systems. Below is a detailed breakdown of its specifications, features, and use cases:
1. Key Specifications
- Interface & Ports:
- 8 physical ports supporting 12Gb/s SAS (Serial Attached SCSI) interface, compatible with SAS-4, SAS-3, and SATA drives.
- Each port can connect to a SAS expander to support more drives (e.g., up to 22 drives per port with expanders, depending on the setup).
- RAID Support:
- Hardware RAID levels: 0, 1, 5, 6, 10, 50, 60, and JBOD (configurable via firmware or management tools).
- Supports hot-spare drives, bad block relocation, and background rebuild for data redundancy.
- Cache Memory:
- 2GB DDR4 cache memory for improved read/write performance, with optional battery backup unit (BBU) or flash backup (not included, may need to be ordered separately).
2. Controller Technology
- Processor: Powered by a PMC (Pericom/Microchip) SAS controller chip, optimized for low latency and high throughput in enterprise workloads.
- PCIe Interface: Typically uses a PCIe 3.0 x8 or x16 slot (check server compatibility), supporting full-duplex data transfer at 12Gb/s per port.
3. Management & Features
- Software Support:
- Web-based management tools (e.g., PMC's RAID management utility) for configuration, monitoring, and alerts.
- Compatibility with server management systems (e.g., IPMI, Redfish) for remote administration.
- Advanced Features:
- Write-back/write-through cache policies to balance performance and data safety.
- SSD caching support (if the controller firmware allows) to accelerate frequently accessed data.
- TRIM command support for SSDs in RAID configurations.
Detailed Photos






Product Parameters
Category |
Description |
Model Name |
8-Port 12Gb SAS RAID Controller Card (2GB Cache, PMC Chipset, CTO&BTO) |
Interface Type |
12Gb SAS (Serial Attached SCSI) |
Port Count |
8 ports (supporting up to 8 direct-attached devices or expansion via expander) |
RAID Levels Supported |
0, 1, 1E, 5, 6, 10, 50, 60 (typical for enterprise RAID cards) |
Cache Memory |
2GB DDR3 (battery-backed or supercapacitor-protected for write-back caching) |
Cache Protection |
Yes (BBU - Battery Backup Unit or supercapacitor for cache persistence during power loss) |
Form Factor |
PCIe card (check compatibility: PCIe 3.0 x8 or PCIe 2.0 x8) |
PCIe Version |
PCIe 3.0 x8 (backward compatible with PCIe 2.0 x8; bandwidth up to 64Gbps) |
Data Transfer Rate |
12Gbps per port (theoretical max; actual throughput depends on workload and disk performance) |
Maximum Drives Supported |
64 devices (via expanders; direct-attached limit: 8 devices) |
Hot-Swap Support |
Yes (supports hot-swapping of connected SAS/SATA drives) |
Operating Temperature |
0°C to 55°C (operating), -40°C to 85°C (storage) |
Power Consumption |
~15W (typical, idle); ~25W (peak under heavy workload) |
Supported Drives |
• SAS (12Gbps) |
• SATA III (6Gbps) (with SAS expander compatibility) |
Management Tools |
• MegaRAID Storage Manager (MSM) (for LSI/Broadcom cards) |
• Adaptec Storage Manager (for Adaptec cards) |
• Vendor-specific CLI tools (e.g., storcli) |
Company Profile
Beijing Qingyi Technology Co., Ltd., a trailblazer in tech innovation since 2008, proudly stands with a registered
capital of 51 million yuan. As a dynamic enterprise, we specialize in providing state-of-the-art ICT software and hardware equipment alongside seamless information system integration services.
Our extensive product lineup features industry-leading servers, storage solutions, workstations, and notebooks from globally esteemed brands like D-ELL, Le-novo, H-PE, Hua-wei, New-H3C, among many others.
For years, we have been the trusted partner of choice, delivering comprehensive ICT equipment solutions that empower businesses of all sizes to achieve their IT objectives. Our expertise in enterprise information construction is matched by our commitment to providing expert technical and consulting services.